Banner WiFi

Technical data

Wireless
  • Frequency band: 2.4-2.483 GHz
  • Modulation: 802.11g/n - OFDM (64-QAM, 16-QAM, QPSK, BPSK); 802.11b - DSSS (DBPSK, DQPSK, CCK)
  • Media Access Protocol: CSMA/CA with ACK
  • X Power: ETSI/EU 5-20 dBm (EIRP) set in 1 dB units; FCC/IC 20-35 dBm (EIRP) set in 1 dB units
  • Multi-Antenna System: 1-TX x 3-RX
  • Support for 802.11n MRC
  • 6 dBi Integrated omnidirectional antennas
  • RX Sensitivity:
    -97 dBm @ 1 Mbps -95 dBm @ 18 Mbps
    -94 dBm @ 5.5 Mbps -92 dBm @ 24 Mbps
    -92 dBm @ 11 Mbps -89 dBm @ 36 Mbps
    -96 dBm @ 6 Mbps -85 dBm @ 48 Mbps
    -96 dBm @ 12 Mbps -84 dBm @ 54 Mbps
  • IEEE 802.11a radio
  • Frequency band: 5.725 - 5.850 GHz (FCC/IC) 5.470 - 5.725 GHz with DFS (ETSI/EU)
  • Modulation: 802.11a/n - OFDM (64-QAM, 16-QAM, QPSK, BPSK)
  • Media Access Protocol: CSMA/CA with ACK
  • TX Power: ETSI/EU 15-30 dBm (EIRP) set in 1
  • dB units; FCC/IC 19-34 dBm (EIRP) set in 1
  • dB units
  • 8 dBi Omnidirectional antenna
  • RX Sensitivity:
    -94 dBm @ 6 Mbps -86 dBm @ 24 Mbps
    -93 dBm @ 9 Mbps -83 dBm @ 36 Mbps
    -92 dBm @ 12 Mbps -78 dBm @ 48 Mbps
    -89 dBm @ 18 Mbps -76 dBm @ 54 Mbps

10x10
Environmental Specifi cations
  • Operating temperature range: -40°C to 55°C
  • Storage temperature range: -40°C to 85°C
  • Weather rating: IP67
  • Wind survivability: >165 mph
  • Wind loading (165 mph): <210 Newtons
  • ASTM B117 Salt Fog rust resistance compliant
  • Shock & vibration: ETSI 300-19-2-4 spec T41.E class 4M3
  • Transportation: ISTA 2A

Quality of Service
  • 802.11e WMM
  • 802.1p/q with 4 queues per VLAN and ESSID
  • 802.1p and DSCP
  • VoIP and VoWiFi Support
    – Heuristics-based Voice Classifi cation
    – Call Admission Control
    – TSpec Classifi cation
    – Seamless Mobility
    – Call Reporting
  • Rate Limiting (Airtime and Throughput Based)

10x10
Management
  • RADIUS Accounting
  • Local and Remote Management Tools via HTTPS
  • Router Access Control
  • Identity-Based Authentication (4 levels)
  • Confi guration Save and Restore
  • Software Upgrades with Rollback
  • Command Line Interface (CLI) via SSH
  • SNMP (standard MIBs and Tropos MIB)
  • Wireless, Network and Client Monitoring and Statistics

10x10
Security
  • Authentication: WPA, WPA2, 802.11i, RADIUS, 802.1x (includes EAP-TLS, EAPTTLS, EAP-SIM, PEAP)
  • Encryption: Open, WEP, AES-CCM, TKIP
  • Hardware assisted encryption
  • AES encryption of mesh and control traffi c
  • Multiple BSSIDs & ESSIDs (ESSID suppression)
  • Full VPN compatibility (VPN fi ltering)
  • Password and Certifi cate-based HTTPS and SSH Remote Access
  • Packet Filtering & Forwarding
  • Peer-to-Peer Blocking
  • Client Access Control Lists
  • Router Access Control
  • Evil Twin Detection and Reporting
  • Denial of Service Attack Detection
  • Tamper-Evident Seal
  • FIPS 140-2 Level 2 certifi ed

Networking
  • Full 802.11b/g, 802.11a, 802.11n Client Compatibility
  • IEEE 802.3u 10/100BaseT Ethernet Ports
  • BGP
  • 802.1q VLAN Support (ESSID and IP based tagging)
  • Support for static and dynamic addressing for wireless and wired clients
  • Onboard DHCP Server and Relay
  • Plug and Play Wired Client Interface
  • Session-Persistent Mobility across Subnets
  • Location Based Services
  • Layer 2 Emulation (L2E)
  • NAT

Approvals
  • FCC CFR 47 Part 15, Class B Subpart C
  • Industry Canada RSS 210
  • EN 301 489-17
  • EN 300 328
  • EN 301 893
  • EN 60950
  • IEC 950
  • UL 60950-1
  • CSA 22.2 No. 60950-1
  • UL 579/IEC 60529 IP67 rated for outdoor use
  • UL 1449/IEC 60664-1
  • CE!

Hardware Specifications
  • Auto-sensing 802.3u 10/100BASE-T Ethernet
  • Power input: PoE (20-60 VDC); 100-277 VAC with external accessory
  • Power consumption: 10 W typical
  • Power-on and network status lamp: Green/Red/Blue
  • Dimensions (w/o mounting brackets or antennas): 8.75” (22.2 cm) x 7.25” (18.4 cm) x 2.5” (6.4 cm); with antennas 14” (35.6 cm)
  • Weight: 5 lbs (2.3 kg) max., with mounting brackets Protection Circuits
  • Antenna Protection Integrated
  • Electrical Protection:
    – EN61000-4-4 Level 2 Electrical Fast Transient Burst Immunity
    – EN61000-4-3 Level 2 EMC Field Immunity
    – EN61000-4-2 Level 2 (contact), Level 3 (air)
    ESD immunity
© i-Rose, d.o.o.